12V Green Laser 532nm 100mW Diode Focus Dot with TTL 0-30KHZ Fan Cool Long Time Working

Laser Parameters:

Wavelength: 532nm
Power: 100mW
Spot ellipticity : > 0.9
Laser Shape:Dot
Focusable:N/A
Idemitsu height: 15mm
Divergence angle:<1.2mrad
Operating temperature: 0 ~ 40 ℃
Modulation: TTL level (0 ~ 30K)
Input voltage: DC / AC 12V
Laser Size: 55 (L) X30 (W) X30 (H)

1. Connect the power plug after turning on the switch. It is applied for 10 minutes after power into a stable state. Switching power supply interval should be greater than five seconds, or easily damage to the laser. Power Plate should be placed on the insulator

2.When you use the power supply board should be placed on an insulator or overhead,Otherwise, bad baked laser power. Avoid laser internal wiring circuit.

3.To make the laser heat well, please laser fixed on a flat metal plate.

4.Please note that the use of the dust, the dust can not be used in place too, if the laser is not a long time in the light hole stickers affixed dust.

Package:

1x 532nm 100mW Laser Dot Diode Module